Broadcast Transmission - Panasonic KX-FC961CX Operating Instructions Manual

Thermal fax with dect
Table of Contents

Advertisement

5.4 Broadcast
transmission
By storing base unit phonebook items (page 30)
or one-touch dial (page 31) into the broadcast
memory, you can send the same document to
multiple parties (up to 20). Your programmed
items will remain in the broadcast memory,
allowing frequent re-use.
L The broadcast function utilises station 1. The
one-touch dial function will be cancelled.
L Both base unit phonebook items and one-
touch dial can be stored into the broadcast
memory.
{STOP}
{BROADCAST}
{FAX/START}
5.4.1 Programming items into
the broadcast memory
1
Press {MENU} repeatedly to display
"PHONEBOOK SET".
2
Press {BROADCAST}.
3
Press {A} or {B} repeatedly to select
"BROADCAST".
4
Press {SET}.
5
Program items.
Using stations 2–5:
Press the desired station key.
Using stations 6–10:
Press {LOWER}, then press the desired
station key.
Using base unit phonebook:
Press {A} or {B} repeatedly to display the
desired item and press {SET}.
L To program other items, repeat this step
(up to 20 items).
Station keys
{LOWER}
{SET}
{A}{B}{>}
{MENU}
L If you program the wrong item, press
{STOP} to erase the item.
6
Press {SET}.
7
Press {STOP}.
Note:
L Confirm the stored items by printing a
broadcast programming list (page 99).
5.4.2 Adding a new item into the
broadcast memory
After initial programming, you can add new items
(up to a combined total of 20).
1
Press {>}.
2
Press {A} or {B} repeatedly to display
"<BROADCAST>".
3
Press {MENU}.
4
Press {*}.
5
Press {A} or {B} repeatedly to display the
desired item you want to add.
6
Press {SET}.
L To add other items, repeat steps 5 and 6
(up to 20 items).
7
Press {STOP}.
5.4.3 Erasing a stored item from
the broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
"<BROADCAST>".
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired item you want to erase.
L To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L To erase other items, repeat steps 5 to 7.
8
Press {STOP}.
5.4.4 Sending the same
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 40).
5. Fax
43

Advertisement

Table of Contents
loading

Table of Contents