Panasonic KX-FC961CX Operating Instructions Manual page 76

9. Programmable Features
6. Select "On" or "Off" (default), then press
{>}.
7. Press {ih}.
Note:
L When call bar is turned on, o is displayed
on the base unit.
9.5.9 Other options
Changing the base unit PIN (personal
identification number)
For security, the base unit PIN must be entered
when changing certain settings. The default PIN
is "0000".
Important:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it.
4. Select "Other Options", then press {>}.
5. Select "Base Unit PIN", then press {>}.
6. Enter the new 4-digit base unit PIN, then
press {j/OK}.
7. Press {ih}.
Resetting cordless handset programming
that uses the base unit PIN
Cordless handset programming that uses the
base unit PIN will be reset (page 70).
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 76).
4. Select "Other Options", then press {>}.
5. Select "Reset Base", then press {>}.
6. Select "Yes", then press {>}.
7. Press {ih}.
Note:
L The repeater mode will be retained (page
78).
76