Table of Contents
Advertisement
Storing/changing emergency numbers
These settings determine which telephone
numbers can be dialled while the call bar feature
is ON (page 73).
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 76).
4. Select "Call Options", then press {>}.
5. Select "Emergency No.", then press {>}.
6. Select a memory location, then press {>}.
L If the memory location already contains
an emergency number, the number is
displayed.
7. Enter/edit the number, then press {j/OK}.
L To erase an emergency number, press
and hold {C/T}.
8. Press {ih}.
Selecting area codes to be deleted
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 36) will
include area codes. If you do not want to dial the
area codes when making calls from the Caller ID
list, you can store the area codes which you want
the unit to delete automatically.
Example: You have stored the area code "123".
If you make a call from the Caller ID list to the
phone number "123-456-7890", the unit dials
"456-7890".
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 76).
4. Select "Call Options", then press {>}.
5. Select "ARS Settings", then press {>}.
6. Select "Area Code", then press {>}.
7. Select an area code location (1-4), then
press {>}.
L If the location already contains an area
code, the code is displayed.
8. Enter an area code (5 digits max.), then
press {j/OK}.
9. Press {ih}.
Setting call restriction
You can restrict selected cordless handsets from
dialling certain numbers. You can assign up to 6
9. Programmable Features
phone numbers to be restricted, and select
which cordless handsets will be restricted.
Storing area codes here will prevent the
restricted cordless handsets from dialling any
phone number in that area code. If a restricted
number is dialled, the call will not be connected
and the restricted number will flash on the
display.
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 76).
4. Select "Call Options", then press {>}.
5. Select "Call Restrict", then press {>}.
6. Set which cordless handsets will be
restricted by pressing the desired cordless
handset number.
L All the registered cordless handset
numbers will be displayed.
L Flashing numbers indicate call restriction
is turned ON for the corresponding
cordless handset.
L To turn call restriction OFF for a cordless
handset, press the number again. The
number will stop flashing.
7. Press {j/OK}.
8. Select a memory location, then press {>}.
L If the memory location already contains a
restricted number, the number is
displayed.
9. Enter the phone number or area code to be
restricted (up to 8 digits), then press
{j/OK}.
L To erase a restricted number, press
{C/T}.
10. Press {ih}.
Setting call bar for the base unit
This feature prohibits making outside calls with
the base unit. When call bar is turned ON, only
intercom calls and emergency calls can be
made. To store emergency numbers, see page
75.
1. Press {j/OK}.
2. Select "Base Unit Setup", then press
{>}.
3. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 76).
4. Select "Call Options", then press {>}.
5. Select "Call Bar", then press {>}.
75
Advertisement
Table of Contents
