Paper Creases - Canon LBP7018C E-Manual

Paper Creases

Perform one of the following solutions according to the cause.
<Cause 1> The paper is not loaded properly.
Load the paper properly.
Solution
"Loading Paper"
<Cause 2> Damp paper is used.
Replace the paper with new paper in an unopened package.
Solution
"Precautions for Paper"
<Cause 3> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 4> There is a foreign object inside the printer.
Solution Remove the foreign object inside the printer.
<Cause 5> Depending on the paper type or the operating environment (especially in a high-
humidity environment), the paper may be creased.
Perform the following procedure in the printer driver.
Solution 1
1. Display the [Paper Source] sheet.
2. Change the [Paper Type] setting as follows.
<Current Setting>
[Plain Paper]
[Plain Paper H]
[Heavy Paper 1]
[Heavy Paper 2]
[Envelope H]
[Coated Paper 2]
[Coated Paper 3]
<Changed Setting>
[Plain Paper L]
[Plain Paper]
[Plain Paper H]
[Heavy Paper 1]
[Envelope]
[Coated Paper 1]
[Coated Paper 2]
019A-061