The Toner Does Not Fix Onto The Paper Well - Canon LBP7018C E-Manual

The Toner Does Not Fix onto the Paper Well

Perform one of the following solutions according to the cause.
<Cause 1> The setting for [Paper Type] is not specified properly.
Specify [Paper Type] properly.
If you are using envelopes, specify [Envelope H].
Solution
"Basic Printing Procedure"
<Cause 2> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 3> Depending on the paper type, toner fixation may deteriorate.
Perform the following procedure in the printer driver.
Solution
Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the
described problems occur.
If you specify [Special Settings G2], curls on the printed paper may become large or unevenness
may appear. In this case, do not specify [Special Settings G2].
<Cause 4> A problem is occurring inside the printer.
If <Service Error> is displayed in the Printer Status Window, perform the solution using the procedure in
Solution
"When <Service Error> Is
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings G2].
Displayed."
019A-065