Seat Belts And Tether Belts; Seat Extension; Bottom Cushion Tilt - freightliner cascadia Driver Manual

Seats and Restraints
4
3
2
1
10/15/2007
1. Isolator Lever
2. Fore/Aft Seat Slide
Lever

3. Bottom Cushion Tilt

Handle
4. Seat Extension Lever
Fig. 7.5, Sears Atlas Seat
forward or backward to the desired position. Release
the bail and fore/aft slide lock, to its original position,
to lock the seat in place.
Bottom Cushion Tilt
Lift the handle upward and move the seat cushion to
the desired position. Three positions are available.
7.5
5
6
7
f910597
5. Backrest Tilt Lever
6. Lumbar Support
Switches
7. Suspension Inflation/
Deflation Switch
A
B
10/15/2007
A. Squeeze the fore-and-aft slide lock against the
adjustment bail.
B. Lift up the adjustment bail.
Fig. 7.6, Fore/Aft Slide Adjustment, Sears Atlas Seat
Armrest Angle
Rotate the control knob, located on the underside of
the armrest, to set the desired angle of the armrest.
Isolator
Position the handle to the left to allow isolation
movement. Position the handle to the right to lock-
out isolation movement.
Suspension Inflation/Deflation
Push forward on the gray rocker switch to inflate and
raise the suspension; push rearward to deflate and
lower the suspension.

Seat Extension

Rotate the handle upward to disengage, then move
the seat cushion to the desired position and release
the lever. Three positions are available.

Seat Belts and Tether Belts

Seat belt assemblies are designed to secure persons
in the vehicle to help reduce the chance of injury, or
the amount of injury, resulting from accidents or sud-
den stops. For this reason, Daimler Trucks North
America LLC (DTNA) urges that the driver and all
passengers, regardless of age or physical condition,
use seat belts when riding in the vehicle.
f910599