Cascadia High-Back Seat - freightliner cascadia Driver Manual

Seats and Restraints
4
3
2
1
05/08/2012
1. Ventilation ON
2. Heat/Ventilation OFF
3. Heat ON
4. Heat/Ventilation ON/OFF Switch
5. Heat/Ventilation Adjustment Switch
Fig. 7.3, Cascadia 2.0 Hi-Back Seat Heat/Ventilation
Controls
Bottom Cushion Extension
Pull the lever to move the seat cushion forwards or
backwards. The cushion moves 2-3/8 inches (60
mm) in 3/8-inch (10-mm) increments.
Seat Fore/Aft Slide
Lift the lever to slide the seat forward or backward.
Release the lever to lock the seat in position.
Seat Tilt
Pull the lever and lean back to tilt the seat back-
wards. Three positions are available.
Armrest Angle
To adjust the armrest angle, tilt the armrest to the
highest position, then down to the lowest position,
then to the desired position.

Cascadia High-Back Seat

See Fig. 7.4 for seat adjustment controls.
Backrest Tilt
To tilt the backrest, lean forward slightly to remove
pressure from the cushion, then turn the knob for-
ward or rearward to achieve the desired position.
7.3
Lumbar Support
5
To adjust the lumbar support, use the lumbar support
switches on the side of the seat.
Height Adjustment
To raise or lower the height of the seat, use the
height adjustment switch on the side of the seat.
Bottom Cushion Extension
f910683
To adjust the fore-and-aft position of the seat cush-
ion, remove your weight from the seat, then lift up
and pull forward on the cushion adjustment handle.
To return the cushion to the aft position, lift up and
push rearward.
Fore/Aft Seat Slide
To adjust the fore-and-aft position of the entire seat,
move the fore-and-aft seat adjustment lever to the
left and slide the seat forward or backward to the
desired position. Move the lever back to its original
position to lock the seat in place.
Fore/Aft Isolator
To engage the isolator, turn the isolator knob rear-
ward to the unlocked position. Turn the isolator knob
forward to the locked position when the isolator fea-
ture is not desired.
Shock Absorber
To adjust the amount of damping the shock absorber
provides, move the lever up to increase damping;
move the lever down to decrease damping.
Front Cushion Height
To adjust the height of the front of the cushion, re-
move your weight from the seat, then turn the adjust-
ment knob toward the front of the seat (clockwise) to
increase cushion height. To lower the cushion height,
turn the adjustment knob toward the rear of the seat
(counterclockwise).
Rear Cushion Height
To adjust the height of the rear of the seat cushion,
remove your weight from the seat and turn the rear
cushion adjustment knob to one of three positions.