Fluids and Lubricants
Type
Engines compliant with EPA07 or newer regulations: Engine lube oil with a sulfated ash level less
Engine Oil
*
than 1.0 wt %; currently referred to as CJ-4 oil.
Engines compliant with EPA07 or newer regulations: Ultralow-sulfur diesel (ULSD) with 15 ppm
†
Fuel
sulfur content or less, based on ASTM D2622 test procedure.
Power Steering Fluid
ATF must meet TES 389 or Dexron III specifications
Hydraulic Clutch Fluid
DOT 4
MobilTrans SHC 50 (RN 2952 E-5), SAE 50W
Manual Transmission
‡§
Lubricant
Synthetic transmission lubricant approved by Eaton, SAE 50W
Caterpillar Diesel Engine Antifreeze/Coolant. Contains supplement additives. Available as a
premixed solution.
Antifreeze
Detroit
Old World Industries, Fleet Charge
Drive Axle Lubricant
*
See the engine manufacturer's manual for specifications.
†
See the engine manufacturer's manual for specifications.
‡
Do not mix types or brands of fluid. Multi-weight and extreme-pressure gear fluids are not recommended.
§
Call 1-800-826-4357 for a complete list of Eaton approved lubricants.
™
Power Cool, premixed solution with supplement additives.
Recommended SAE Viscosity Grade
75W
75W—80
75W—90
75W—140
80W—90
80W—140
Table 26.9, Approved Fluids and Lubricants
Approved Fluid or Lubricant
™
, with supplement additives.
Ambient Temperature Range
–40°F to –15°F (–40°C to –26°C)
–40°F to 80°F (–40°C to 27°C)
–40°F to 100°F (–40°C to 38°C)
–40°F and above (–40°C and above)
–15°F to 100°F (–26°C to 38°C)
10°F and above (–12°C and above)
Specifications
26.4