freightliner cascadia Driver Manual page 73

VORAD started
Collision Warn
A
VORAD started
Collision Warn
B
SmartCruise
02/03/2012
A. Configured for CWS only
B. Configured for CWS and SmartCruise
Fig. 6.2, System Configuration Screens
System Status
Demo
Volume
02/03/2012
Fig. 6.3, Menu Screen
The display of any menu item is overridden when-
ever conditions require an alert or collision warning
to be displayed.
Demo (vehicle must be stationary)
When the vehicle is stationary and Demo mode is
selected, the DIU will demonstrate the meaning of all
LED and screen displays, including alert messages
and sound warnings. Scroll through the demo
OK
TM
OK
TM
f610921a
OK
TM
f610922a
Driver Assistance Features
screens by pressing the down arrow. Pressing any
other key exits Demo mode.
Volume
The minimum adjustable volume is 50% of the maxi-
mum volume. If the DIU volume is not adjustable, the
display screen shows a grayed bar graph whenever
volume adjustment is selected. See
each ignition switch cycle, the volume will default
back to 100%.
NOTE: Headway and collision alert tones may
be suppressed when the brake is applied if the
system is configured to do so.
Volume
A
Volume
B
02/03/2012
A. Adjustable Volume
B. Non-Adjustable Volume
Fig. 6.4, Volume Screen
SmartCruise Headway Range
Headway range adjustment is only available with
SmartCruise. Headway range is adjustable between
3.25 and 2.25 seconds. The headway range setting
will default to 3.25 seconds after each ignition power
cycle.
If headway range adjustment is disabled, only the
3.25 sec screen is displayed. See
various headway range screens. Press the OK but-
ton to exit the menu.
Fig. 6.4. After
OK
TM
OK
TM
f610925a
Fig. 6.5 for the
6.2