freightliner cascadia Driver Manual page 48

Instruments
Trip Info
Menu
Fuel Info
Engine Info
Trip
Menu
Leg
Trip Info
Miles:
Menu
Gallons:
Trip Info
Avg. MPG:
Trip
Indicates when to press
the ENTER switch
Indicates when to press
MENU
the MENU BACK switch
BACK
06/21/2012
Fig. 4.26, Parked Menu Navigation, ICU4Me
When navigating the parked menus, the left side of
the driver message center displays a "breadcrumb
menu" to show the order of menus and submenus
that have been selected during the current naviga-
tion.
Trip Information
The ICU can record data for one trip segment and
one leg segment. When trip information is reset, all
the leg information is reset as well.
Fuel Information
Using this menu, the driver can view the total fuel
used since the last reset, the total idle gallons used
4.23
1/7
MENU
BACK
1/2
MENU
BACK
1/3
123456.7
123456.7
123.4
f611193
since the last reset, and the average MPG since the
last reset.
Engine Information
Using this menu, the driver can view engine miles,
engine hours, gallons used, PTO hours, and PTO
gallons. Engine oil level is optional for Detroit en-
gines. The information contained in the Engine Infor-
mation screens cannot be reset.
Diagnostics
Active and historical faults are displayed in the diag-
nostics menu. See Fig.
faults, the total number of faults is displayed in pa-
renthesis next to the affected controller. To view spe-
cific active faults, press the upper half of the ICU4Me
control switch on the dash. Press the upper half of
the ICU4Me control switch to toggle between the text
description and the failure code for each selected
fault.
Service Information
Using this menu, the driver can enable, disable, and
set service intervals for engine miles or engine
hours. After enabling service intervals, select interval
unit (miles or hours), and the interval duration.
Settings
The settings menu contains the controls for the fol-
lowing settings:
•
Display (includes brightness, contrast, display
light, and night mode settings)
•
Gauge select
•
Language
•
Self-test
•
Temperature warning enable/disable
•
Units
The Gauge Select submenu allows the driver to se-
lect certain gauge values for display in the message
field while driving. See
switches on the steering wheel to scroll through the
list of available gauges, then press the upper half of
the ICU4Me control switch to select a desired gauge.
The ICU4Me control switch can also be used to un-
check boxes if necessary.
4.27. If there are any active
Fig. 4.28. Use the + and –