Charging The Battery While In The Camcorder - Silvercrest SCAZ 5.00 B2 User Manual And Service Information

SilverCrest SCAZ 5.00 B2

Charging the battery while in the camcorder

It is also possible to recharge the camcorder battery via the USB power of a computer. To
do this, you will need the USB/AV cable supplied.

Insert the rechargeable battery into the camcorder (see page 165).

Use the USB/AV cable supplied to connect the camcorder to an available USB
port on a computer.

Please make sure that your camcorder is switched off. If the device is switched on,
its battery will not recharge. If necessary, press the On/Off button (13) to switch
the camcorder off.

The power light (9) goes red during charging. When the charging process is
complete, the power light goes out.
Some computers do not supply USB power while they are turned
off. If the camcorder power light does not come on, make sure your
computer is switched on.
164 - English