Table of Contents
Advertisement
6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
7.
Replace the computer
cover.
8. Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives. See
9. Verify that your computer works correctly by running the
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
Removing a Floppy Drive
1. Follow the procedures in
"Before You
NOTE:
Since the following steps do not require the complete removal of the CD/DVD drive, it is not necessary to disconnect the cables connecting the
CD/DVD drive.
2.
Remove the CD/DVD drive
and carefully set it aside.
NOTICE:
Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors.
3. Pull up on the drive release latch and slide the floppy drive towards the back of the computer. Then, lift up to remove the drive from the computer.
Dell
Diagnostics.
Begin."
"System
Setup" for more information.
Advertisement
Table of Contents
