1 CD/DVD drive
2 shoulder screws (3)
3 shoulder screw slots (2)
6. Connect the power and CD/DVD drive cables to the drive and to the system board.
NOTE:
The CD/DVD drive cable may be a SATA cable and appear differently than the image below. For information on SATA cable connectors, see
"General Installation
Guidelines."
1 power cable
2 CD/DVD drive cable
3 CD/DVD drive connector (IDE)
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8.
Replace the computer
cover.
9. Update your configuration information in
10. Verify that your computer works correctly by running the
Back to Contents Page
system setup
by setting the appropriate Drive option (0 or 1) under Drives.
Dell
Diagnostics.