Table of Contents
Advertisement
3. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
4. If applicable, remove the computer stand (for instructions, see the documentation that came with the stand) and the cable cover, if attached.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
5. Remove the computer cover:
Remove the
mini tower computer
l
Remove the
desktop computer
l
Remove the
small form factor computer
l
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of
the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal
components.
Back to Contents Page
cover.
cover.
cover.
Advertisement
Table of Contents
