Floppy Drive; Removing A Floppy Drive - Dell Dimension 9150 Owner's Manual

8 Check all connectors to be certain that they are properly cabled and firmly seated.
9 Replace the computer cover (page 107).
NOTICE:
the computer.
10 Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.

Floppy Drive

CAUTION:
Product Information Guide.
CAUTION:
before opening the cover.
NOTE:

Removing a Floppy Drive

1 Follow the procedures in "Before You Begin" on page 63.
2 Remove the computer cover (see page 68).
3 Disconnect the power and floppy drive cables from the back of the floppy drive.
4 Disconnect the other end of the floppy drive cable from the system board.
96
Removing and Installing Parts
To connect a network cable, first plug the cable into the network wall jack and then plug it into
Before you begin any of the procedures in this section, follow the safety instructions in the
To guard against electrical shock, always unplug your computer from the electrical outlet
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 98."