CyberData 011095 Operation Manual page 3

Revision Information
Revision 930360E, released on February 11, 2011, corresponds to firmware version 6.0.0 and has the
following changes:
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
• Updates
Operations Guide
Figure 2-3, "Loudspeaker Amplifier
address and restoring the factory default settings has changed.
Figure 2-18, "Home
Figure 2-19, "Device Configuration
Figure 2-20, "Network Configuration
Figure 2-21, "SIP Configuration
Figure 2-22, "Nightringer Configuration
Figure 2-23, "Sensor Configuration
Figure 2-24, "Multicast Configuration
Figure 2-25, "Audio Configuration
Figure 2-31, "Event Configuration
Figure 2-32, "Autoprovisioning Configuration
Figure 2-33, "Upgrade Firmware
Figure 2-34, "Upgrade Firmware
Figure 2-35, "Reboot
Section 2.2.1, "Loudspeaker Amplifier
address and restoring the factory default settings has changed.
Section 2.2.7.1, "RTFM
the factory default settings has changed.
Section 2.3.13, "Upgrade the Firmware and Reboot the Loudspeaker
TFTP server is no longer needed to upgrade the firmware.
Components". The steps for announcing the IP
Page".
Page".
Page".
Page".
Setup".
Page".
Setup".
Page".
Page".
Page".
Page".
Page".
Components". The steps for announcing the IP
Switch". The steps for announcing the IP address and restoring
930360E
Page".
Amplifier". A
CyberData Corporation