Figure 45. Link Self Test Running Continuously On An Auxiliary Channel At 48.25 Kbps - Canoga Perkins EdgeAccess Universal Chassis System 2361 T1 User Manual

The EdgeAccess Universal Chassis System
A modem can be manually switched from inactive to active for the following reasons:
1) To bring the modem into standard use.
2) To test with a full data payload for quality verification purposes.
3) To track down an unknown, intermittent error, and determine if this modem is the source
of it.
Note: Switching from redundant mode to a non-redundant modem mode does not
require that you replace the redundant ELIMs. You can use redundant ELIMs for
normal modem operation (As long as the Auto-Switching redundancy mode is off).
LIU Logic
Central Office

Figure 45. Link Self Test Running Continuously on an Auxiliary Channel at 48.25 kbps

Fiber
BER
GEN
BER
DET.
2361 Modem Users Manual
Fiber Logic LIU
BER
DET.
BER
GEN
DTE
7-7