Main Menu; Figure 23. The Modem Main Menu Screen; Table 2 Eia-232 De-9 Pin Out - Canoga Perkins EdgeAccess Universal Chassis System 2361 T1 User Manual

The EdgeAccess Universal Chassis System
When the switch position is TRM, the interface is a DCE, and the I/O assignments for the 9-pin
serial port EIA-232 interface (on the standalone modem) are:
Signal Name
TXD
RXD
RTS
CTS
DTR
DSR
DCD
RI
S/G GND
Note the 9-pin serial port on the standalone modem can be configured as a DTE. This permits
connection to a serial port on a typical dial-up modem device.
For accessing the terminal screens through the DMM, please consult the DMM manual regarding
two important issues:
•
Accessing a specific modem's menu screens via the DMM
•
Viewing a specific modem within the UCS
Using the DMM screen, you must first access the Chassis that the modem resides in,
then access the slot number for the modem. You'll then see the same terminal screens
as if you had interfaced to the modem directly.

4.3 Main Menu

Once the correct chassis and slot number is accessed via the DMM or direct connection to the
modem, the modem's Main Menu screen will appear.

Table 2 EIA-232 DE-9 Pin Out

Pin Number
3
2
7
8
4
6
1
9
5

Figure 23. The Modem Main Menu Screen

2361 Modem Users Manual
Source I/O
DTE I
DCE O
DTE I
DCE O
DTE I
DCE O
DCE O
DCE O
____ ----
4-3