The EdgeAccess Universal Chassis System
4.3.1 Setting a Password
The 2361 modem is factory shipped with "Enter" as the password (Press "Enter" in lieu of a
password). To set a password, do the following:
1. From the Main Menu, type "5" and press Enter. The Utilities screen will open (Passwords,
Date and Time, SLIP/PPP Configuration, SNMP, and Initialization strings are managed from
this screen).
2. Type"2" to set up a Password (or change an existing one).
3. If you are changing the password, rather than creating a new one, the existing password is
prompted, before a new one can be set up.
4. Type the new password. Confirm your choice when prompted.
5. The password will be required the next time an attempt is made to access the modem screen.
4.3.2 Setting Date and Time
1. From the Main Menu, type "5" and press Enter. The Utilities screen will open.
2. Type "1" to Set Date and Time.
3. Enter date and time as depicted in prompt. Date must be entered as well as Time.
4. Press Enter to validate choice.
Note: If a DMM is used in the UCS, the DMM date and time will overwrite what is
set here for the modem.
4-4
Figure 24. The Utilities Screen
2361 Modem Users Manual