The EdgeAccess Universal Chassis System
1.1.7 Main Module LEDs:
STA
Green/Red/Yellow
CFG
Red
CLS
Red
TST
Yellow/Red
1.1.8 ELIM LEDs
LOS
Red
AIS
Yellow
Note: LEDs report local modem errors with solid indicators, and remote
modem errors with flashing indicators.
1.1.9 OLIM LED:
SQL
Green
Red
1.1.10 Rackmount Modem
On the front panel, the rackmount modem includes the following:
•
1 RJ-45 EIA-232 port for terminal port management. It is available in
DCE.
•
A Reset switch. This switch resets the processor without affecting the flow of
the payload.
1.2 ELIM Interface Options
There are two ELIM types. All electrical interfaces comply with the ITU G.703 standard. ELIMs
with RJ-48 connectors are available with DTE or DCE configuration. The type of configuration
is indicated on the front panel of the ELIM.
Connector
RJ-48
DA-15
Modem Status
Configuration error
Composite Receive
Loss of Sync
Loopback and
BERT test
Loss of Signal
"all 1's"
Receiving acceptable Signal
Quality Level
Receiving below acceptable
Signal Quality Level
Cable
Twisted Pair
Twisted Pair
2361 Modem Users Manual
Figure 6. Main Module and
ELIM LEDs
Impedance
100 Ohm
100 Ohm
1-5