Changing Engine Oil - Hyundai HHD1250 User Manual

5.4: Changing Engine Oil

1. Make sure the generator is placed on a flat, level surface
2. Start engine and run until it gets warm
3. Stop engine
4. Place oil pan or other container underneath the generator for
holding oil
5. Keep oil filler cap to avoid oil spray
6. Use a wrench to remove the drain bolt and sealing washer
7. Slowly unscrew and remove the oil filler cap
8. Allow oil to completely drain into oil pan or container
9. Use clean cloth to wipe around oil fill and drain plug to clean any
dirt and debris
10. Reinstall the sealing washer and drain plug bolt
11. Pour new engine oil into the oil fill hole
12. Check the oil level
13. Reinstall the oil filler cap (Refer to Fig. 5.2 and Fig. 3.0)
24.
Drain Plug
CAUTION
Used motor oil may cause skin cancer if repeated
contact with the skin for prolonged periods. Wash your
hands with soap and water as soon as possible after
handling used oil.
Fig. 5.2
Dipstick