Using The Setup Menus - Pace TDC778X Operator's Manual

USING THE SETUP MENUS

The Setup menus allow you to make further settings to control how your set-top works. These are available in your on-screen guide and
should be described in the information provided by your service-provider. There may also be on-screen information to explain these menus.
However, please note there are certain items and settings that may affect how your set-top and TV work. See the table below for
information about these.
Item Setting
Cable Box Front LED
Setup Display
AC Outlet
RF Bypass
Configuration
Audio Default Audio
Track
Optimal
Stereo
Audio
Output
Screen position
Other items and options may be available on these screens. The menus may be subject to change in the future, as your set-top advances with new technology.

Options Notes
Current Time, If setting is "Current Time", the time is displayed on the front panel when your set-top is
Current Channel switched on. If setting is "Current Channel", the program channel number is displayed.
Switched, If setting is "Switched", the AC outlet on your set-top's rear panel is on when your set-top
Unswitched is on, and off when your set-top is off, so any TV that is therefore receiving its power from
this AC outlet will switch off when your set-top is turned off. If setting is "Unswitched",
the AC outlet is always on, so any TV that is receiving its power from this AC outlet will
continue to receive power whether your set-top is switched on or off.
Off, On You must set this to "On" in order to use RF Bypass.
For information about RF Bypass, see page 20.
Allows you to view the configuration of your set-top.
Channel Default, Sets the language track that your set-top first attempts to use when tuning to a channel.
English, Espagñol, "Channel Default" means your set-top will use the default audio track for the program.
Français, Português Selecting a language means it will use the corresponding language track, if available.
Selecting this option enables your set-top to regulate the volume to minimize sudden
changes in volume, for example during a commercial break.
TV Speakers, If you select "Advanced", further settings are displayed, allowing you to set the Compression
Stereo, Advanced (to None, Light or Heavy) and the Stereo Output (to Mono, Stereo or Matrix Stereo).
This allows you to adjust how the picture displays on your TV screen.