About The Tv Aspect Ratio - Pace TDC778X Operator's Manual

MAKING USER SETTINGS (cont.)

About the TV Aspect Ratio

The TV that you have connected to your set-top has an aspect ratio (width-to-height ratio) of 4:3
(basic/standard) or 16:9 (widescreen). You must set the appropriate TV Aspect Ratio (4:3 or 16:9) on
your set-top, so that it is compatible with your TV.
Setting the TV Aspect Ratio
If you have not done so, put your set-top into "user settings mode", as described on page 21. The
front panel displays "ASPt".
The flow diagram on the far right shows how you use the arrow and select buttons on your set-
top's front panel to change the display and make the settings. See also the instructions below.
1. To change the TV Aspect Ratio, press the R button. The current TV
Aspect Ratio (4:3 or 16:9) appears on the front panel. Depending on the
set-up, you may also see the menu, shown right, on your TV screen.
2. Press the U or D button to choose the TV Aspect Ratio you want.
3. Press the select button to confirm the choice and change to that TV
Aspect Ratio.
4. Press the L button. The front panel will display "ASPt" again.
5. To continue making the settings, see the next section.

TV Aspect Ratio
4:3
16:9
4:3 standard TV,
EDTV or HDTV
16:9 HDTV