Front Panel Settings - Pace TDC778X Operator's Manual

MAKING USER SETTINGS (cont.)

Front Panel Settings

Occasionally, the brightness of your set-top's front panel display may change, for example the display
may dim automatically when your set-top is turned off. You can use the Front Panel Settings to set
the brightness levels of the display at its brightest and dimmest.
Changing the Front Panel Display Settings
If you have not done so already, put your set-top into "user settings mode", as described on page 21.
The front panel displays "ASPt".
1. To change the Front Panel Display settings, press the D button until the front panel displays "brit",
as shown right
2. Press the R button. The Front Panel Setting menu, shown right, appears.
3. Press the U or D button to highlight "Dim Level" or "Bright Level" as required ("Dim Level" is
the brightness of the display at its dimmest; "Bright Level" is the brightness of the display at its
brightest.)
4. Use the select button to choose the setting you want (the setting changes each time you press
select): "Low", "Std" (Standard) or "High".
5. When you have made all the changes you want to make, press the L button to re-display the
User Settings menu.
Removing the User Settings menus
When you have finished making changes, press the power button to remove the User Settings
menu and return to normal viewing.
0
Front Panel Setting
Dim Level : Low
Bright Level : High