Connecting Your Tv To The Ac Power Supply - Pace TDC778X Operator's Manual

CONNECTING THE EQUIPMENT (cont.)
Do not connect your set-top (or any other equipment such as a TV or VCR) to the AC power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized plugs on power cords. A polarized plug has two blades
with one wider than the other. This plug fits into the outlet in only one way; match the wide blade of the
plug to the wide slot of the outlet.

Connecting your TV to the AC power supply

If your TV has a rating of less than 500 W, connect the power cord from your TV into the connector
labeled "POWER OUTLET" on the rear panel of your set-top. This saves a wall outlet (although, if
your TV is rated 500 W or more, you must connect it to a wall outlet).
Connecting the power cord to your set-top
Before you connect your set-top to a wall outlet, connect the polarized socket on the power cord
into the plug labeled "POWER INPUT" on your set-top's rear panel.
Connecting equipment to the wall AC outlets
Connect the polarized plugs on the power cords from your set-top, VCR and any other equipment
into wall AC outlets. If these outlets have switches, switch them to ON.

WARNINGS