Pace TDC778X Operator's Manual page 29

2. Press the R button. Either "yes" (switched on) or "no" (switched off) is displayed. If you can see
the on-screen menus, the menu shown right appears.
3. If you want to change the setting, press U or D. Press the select button to confirm the choice
and change to the new setting.
4. Press the L button. The front panel displays "PiLL" again.
To continue making the settings, see the next section.
16:9 picture in a 4:3 transmission
Sometimes 4:3 transmissions may contain a 16:9 picture, with black borders at the top and bottom. On a
16:9 TV this may display with black borders all the way around the picture. To remove these borders, you
can use the "Zoom" button on your remote control. See the example below. For more information about
using Zoom, see page 33.
4:3 transmission 16:9 TV with no automatic
detection of 4:3,
Auto-pillarbox switched off
NOTE
Use 'Zoom' to increase the picture size.
16:9 TV with no automatic
detection of 4:3, (Note: the picture may lose some
Auto-pillarbox switched on definition due to the expansion)
MAKING USER SETTINGS (cont.)
Auto Pillarbox?
YES
NO