Operating Your Set-Top; Turning Your Set-Top On And Off - Pace TDC778X Operator's Manual

Turning your set-top on and off

After you have connected your set-top to the wall AC outlet (and switched this outlet ON, if it has a
switch), the light next to the power button on your set-top's front panel should be red.
Wait for a few seconds, then press the button labeled power on the front panel of your set-top to
turn it on. The light next to the power button goes from red to green, to show that your set-top is
on.
If the light next to the power button is neither red nor green, there is a problem.
To turn your set-top on or off at any time, press the power button on its front panel or the
POWER button on your remote control (first making sure your remote control is set to control
your set-top).
Never turn off your set-top by simply disconnecting it from the power supply. If you need to
disconnect your set-top, first stop any recording. Then turn off the set-top by pressing the power
button on its front panel or on your remote control, so that the light by the power button goes red.
Then wait 60 seconds before disconnecting your set-top at the wall AC outlet.
It is important that, unless there is a lightning storm or you will be away from your home for a long time,
you do not unplug your set-top at the wall AC outlet (or do not switch it off there, if the outlet has a
switch). Your set-top cannot be updated with new features, through the cable, if it is disconnected from the
AC power supply.
Depending on your set-top's settings, if you switch your set-top off, any TV that is attached to your set-
top's POWER OUTLET may also turn off. For more details, see page 34.
NOTES

OPERATING YOUR SET-TOP

To turn on your set-top,
press the power button.
The light next to the
button changes from
red to green.
Front panel display, showing
the time (see page 34)