Mitel 6800i Series Administrator's Manual page 522

Mitel 6800i Series SIP Phone Release 4.0.0 SP1 Administrator Guide
CONFIGURING CENTRALIZED CONFERENCING USING THE MITEL WEB
UI
Use the following procedure to configure centralized conferencing using the Mitel Web UI.
MITEL WEB UI
Global Configuration
1. Click on Advanced Settings->Global SIP Settings->Basic SIP Network Settings.
2. In the "Conference Server URI" field, do one of the following actions:
• To disable centralized conferencing on the IP phone, leave this field empty (blank).
• To enable SIP centralized conferencing on the IP phone, do one of the following actions:
• If you have specified a proxy server/registrar server, then to reach the media server
via the proxy server, set this field to one of the following:
conf (Sylantro server), or
Conference (BroadSoft server)
By setting this field to conf or Conference, you specify conf@<proxy_server
_address>: <proxy_port>. For example, if the proxy server address is
206.229.26.60 and the port used is 10060, then by setting this parameter to conf,
you are specifying the following: conf@206.229.26.60:10060.
• To reach the media server using a different address/port than that specified by the
proxy, set this field to the following:
conf@<media_server _address>: <media_port>
3. Click Save Settings to save your changes.
Per-Line Configuration
5-280