Technical Specifications - VTech A2210-NS User Manual

Analog contemporary corded 1-line hotel phone

Table of Contents

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for

Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier

in the format US:AAAKXNANXXXX. This identifier must be provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part

68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product.

It is designed to be connected to a compatible modular jack that is also compliant. An RJ jack should normally be used for

connecting to a single line and an RJ jack for two lines. See the installation instructions in the user guide.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still

have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the

product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For

more information, please contact your telephone service provider.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone

line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable

alarm equipment, consult your telephone service provider or a qualified installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs

to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, contact your

local distributor.

If this equipment is causing harm to the telephone network, your telephone service provider may temporarily discontinue your

telephone service. Your telephone service provider is required to notify you before interrupting service. If advance notice is not

practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and your telephone

service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make

changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. Your telephone

service provider is required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in

these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up.

Perform such activities in off-peak hours, such as early morning or late evening.

When the adjunct is used with a leased system, permission of the owner of the equipment must be obtained for connection of the

adjunct because modification of the host system is often required.

This product can only be connected to the host equipment and never directly to the network.

Industry Canada

Operation is subject to the following two conditions: () this device may not cause harmful interference, and (2) this device must

accept any interference, including interference that may cause undesired operation.

The term ''IC:'' before the certification/registration number only signifies that the Industry Canada technical specifications were met.

This product meets the applicable Industry Canada technical specifications.