Table of Contents
Advertisement
Installation option - converting from desktop to wall mount position
To mount the telephone base on the wall:
.
Set aside the handset. On the telephone base cradle, place a coin in the provided slit of the wall mount clip and rotate a half
turn (80 degrees). It locks into place with the protruding edge pointing towards the upper edge of the telephone base. This
protruding edge holds the handset when the phone is mounted on the wall.
2.
Turn the telephone base over with the bottom side facing up. To remove the mounting bracket, firmly push both tabs downward
and pull up until both tabs release from the grooves.
.
Mount the telephone base on
base down on both mounting studs until it locks into place.
.
Replace the handset on the telephone base cradle.
Mounting
bracket
the wall by aligning the eyelets with the mounting studs of the wall plate.
Eyelets
Protruding edge
Then slide the telephone
Hide quick links:
Advertisement
Table of Contents
