Telephone Settings; Ringer Tone - VTech A2210-NS User Manual

Analog contemporary corded 1-line hotel phone
Table of Contents

Advertisement

Telephone settings

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
Ringer volume

Ringer tone

Flash
Voicemail voltage detection
Ringer tone
There are  ringer tone options.
To change the ringer tone:
.
Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if it is in desktop position. To remove
the mounting bracket, firmly push both tabs downward and pull up until they release from the grooves.
2.
Slide the ringer tone switch to select the desired detented position using a narrow object such as a standard screwdriver.
.
Install the mounting bracket accordingly.
Flash
There are 3 flash duration options that can be programmed.
To change the flash duration:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
.
The MUTE key flashes when in administrator mode.
2.
Press FLASH and you hear  beeps. Then press a dialing key, 1 (00ms), 2 (00ms) or 3 (600ms), to select the desired flash
duration. Press the recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
Options
1, 2*, 3, 4
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
1 (00ms), 2 (00ms), 3* (600ms)
Disable voicemail voltage detection,
Periodic low voltage pulse detection method,
Steady high voltage and periodic high voltage
pulse detection method
Mounting
bracket
Ringer tone
switch

Adjustable by:
User and administrator
User and
administrator
Administrator only
Administrator only
Administrator only

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents