Names And Functions Of Wireless Remote Control; Light Button - Vivax ACP-09CH25GEH User Manual

Operation of wireless remote control

Names and functions of wireless remote control

This wireless remote control is universal, and it could be used for many units, some
buttons of this control which are not available to this unit will not be described below.
Remote control
BLOW
BLOW button
Press this button, the Blow On and Blow
Off can be set up. Under the Cool and Dry
mode, press this button once, the signal
"DRY" will be displayed, and BLOW is
turned on; When repressing this button
once more, signal "DRY" will be concealed,
at this time, the BLOW is turn off. After
powered on, Blow Off is defaulted. If
operating ON/OFF button and changing
mode to Cool, Dry, the status of BLOW
will stay in the original position. If unit
is off, only Blow off can be set up and send
the signal. This function is not available
under the Auto, Fan and Heat mode
and there is no Blow signal displayed.
TURBO
TURBO button
Under Cool or Heat mode, press this
button can turn on or turn off the Turbo
function.After the Turbo function turned
on, the signal of Turbo will display. The
signal will be automatically cancelled if
changing the mode or fan speed.
+
+ button
Presetting temperature can be increased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the
signal will be displayed all the time.
The temperature adjustment is unava-
ilable under the Auto mode, but the order
can be sent if pressing this button.
Temperature of Celsius degree setting:
16-30 ; for Fahrenheit degree setting:
61-86.
-
- button
Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the
signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
LIGHT

LIGHT button

Press this button at unit On or Off status,
Light On and Light Off can be set up.
After powered on, Light On is defaulted.