Operation Of Wireless Remote Control - Vivax ACP-22CH65GEK User Manual

Operation of wireless remote control

Names and functions of wireless remote control
Note: Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
Remote control
ON/OFF
ON/OFF button
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
MODE
MODE button
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed; Under Heat mode, the
initial value is 28
modes, the initial value is 25
AUTO
AUTO
COOL
HEAT
;Under other
82
77
COOL DRY
HEAT FAN
DRY
FAN
(Only for cooling and heating unit.
As for cooling only unit, it won't
have any action when it receives
the signal of heating operation.)
SLEEP
SLEEP button
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
FAN
FAN button
By pressing this key, you may select AUTO,
FAN 1, FAN 2, FAN 3 or FAN 4, and may
also cycle between them. FAN 4 only in
cool or heat mode. After being energized,
AUTO is defaulted. Only LOW fan can be
set under DRY mode, pressing this key
can not adjust the fan speed, but can
send message.
AUTO
Fan 1
Fan 3
SWING
SWING button
Press this key to activate or deactivate
the swing.
Fan 2
Fan 4