Names And Functions Of Indicators On Remote Controller - Vivax ACP-24CH70AEB User Manual

LOCK Button: Push this button to lock in all the current
12
settings. To release settings, push again. (Use a
round stick to push this button )
POWERFUL Button: Press this button on cooling/heating mode
13
to go into powerful cooling (heating)operation.Press again to
cancel it.
Note: The unit will automatically revert back to the previous
operational mode after continuously operating under the
powerful cooling mode.

Names and Functions of indicators on Remote Controller

1
2
4
6
7
DIGITAL DISPLAY area: This area will show the temperature
1
and, if in the TIMER mode, will show the ON and OFF settings
of the TIMER. It will automatically revert back to show the
temperature after 5 seconds. Under
nothing is shown in this area.
TRANSMISSION Indicator: This indicator flashes once when
2
remote controller transmits signals to the indoor unit.
ON/OFF Indicator: This symbol appears when the unit is turned
3
on by the remote controller, and disappears when the unit is
turned off.
OPERATION MODE Indicator: Shows the current operation
4
modes-- AUTO
HEAT only available for heat pump model.
Display Panel
TIMER ON/ OFF
Fig. 2
COOL DRY
3
1mm little
3
4
5
operation mode,
HEAT and FAN