Set Outlet Thresholds - Raritan Dominion PX User Manual

4. Select an outlet state from the drop-down list in the Outlet state on
device startup. This will determine if the outlet is ON or OFF when
the Dominion PX powers up. If set to Device Default, the state for
this outlet will be determined by the Default Outlet State in the PDU
Setup page.
5. Click Apply. The new name is applied.

Set Outlet Thresholds

To set the current thresholds of an outlet:
1. Choose Details > Outlet Setup. The Outlet Setup window opens.
2. Select an outlet from the Show setup of outlet drop-down list.
3. Type a number in the field labeled Power off period during outlet
power cycling. When an outlet is power cycled, it is turned off and
then back on. The number you enter here determines the length of
time (in seconds) it takes for the outlet to turn back on after it is shut
down during the power cycle. If left blank, this outlet will use the
value set in the PDU Setup page as a default.
Note: You can power cycle an outlet from the Outlet Details window.
See Power Cycling an Outlet
page 75).
4. Set the RMS current thresholds for the outlet in the Thresholds
panel.
5. When you are finished, click Apply. The setup details are applied.
Chapter 5: Using the Web Interface
(see "Power Cycle an Outlet" on
73