Modifying The Lan Interface Settings - Raritan Dominion PX User Manual

6. When you are finished, click Apply. The settings are modified.

Modifying the LAN Interface Settings

The LAN interface speed and duplex mode were set during the
installation and configuration process (see
PX for Network Connectivity
To modify either setting:
1. Choose Device Settings > Network. The Network Settings window
opens. The LAN Interface Settings panel on the bottom right shows
the interface speed and duplex mode.
2. To change the interface speed, select the speed you want from the
drop-down list in the LAN Interface Speed field. Your choices are:
Autodetect (system selects optimum speed)
10 Mbps
100 Mbps
3. To change the duplex mode, select the mode you want from the
drop-down list in the LAN Interface Duplex Mode field. Your choices
are:
Autodetect (system selects optimum mode)
Half duplex
Full duplex
4. Half duplex allows data to be transmitted to and from the Dominion
PX, but not at the same time. Full duplex allows data to be
transmitted in both directions at the same time.
5. When you are finished, click Apply. The settings are modified.
Chapter 5: Using the Web Interface
Configuring the Dominion
(on page 15)).
105