Gather Information For Ldap Configuration - Raritan Dominion PX User Manual

Chapter 5: Using the Web Interface
64

Gather Information for LDAP Configuration.

Configuring Dominion PX to use LDAP authentication requires
knowledge of your LDAP server and directory settings. Below is a list of
settings you will need values for to configure LDAP authentication. If you
are not familliar with these settings, ask your LDAP administrator to help
you prepare this list.
You will need to know:
•
The IP Address of the LDAP server.
•
(Optionally) The IP address of a backup or secondary LDAP server.
•
If the Secure LDAP protocol (LDAP with SSL) is being used.
If Secure LDAP is in use, ask your LDAP administrator for the CA
certificate file.
•
The network port used by the LDAP server.
•
The type of LDAP server used. It will be one of the following:
A generic LDAP server.
Novell Directory Service.
Microsoft Active Directory.
If using a Microsoft Active Directory server, ask your AD
administrator for the name of the Active Directory Domain.
•
The Base DN of the server (used for searching for users).
•
The login name attribute (or AuthorizationString).
•
The user entry object class.
•
The user search subfilter (or BaseSearch).