Oven Cooking - Maytag 8113P560-60 User Manual

Oven Cooking

Manual Clean Oven Control
(select models)
BAKE Use for baking and roasting.
BROIL Use for broiling and top browning.
TIMER Sets timer.
CLOCK Use to set time-of-day clock.
CANCEL Cancels all operations except timer
and clock.
▲ (More) or
Enters or changes time, oven
▼ (Less)
temperature. Sets HI or LO broil.
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
Setting the Clock
1. Press the CLOCK pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the ▲ or ▼ pads. If the ▲
or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the CLOCK pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours and
59 minutes (99:59). Time will be displayed in minutes and not
in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
1. Press the TIMER pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the ▲ or ▼ pad until the desired time is displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. "0:00"
will appear in the display.
• If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the BAKE or BROIL pads and the
current temperature setting will briefly reappear in the
display during a timing operation.
To cancel the timer operation:
Press and hold the TIMER pad for several seconds.
Setting the Controls For Baking or Roasting:
1. Press BAKE pad.
• 000 will light and the Bake indicator light
will flash in the display.
• If you press the BAKE pad and do not set an oven temp-
erature within 30 seconds, the program will automatically
cancel and the time of day will reappear in the display.
2. Press the ▲ or ▼ pad until the desired oven temperature is
displayed.
• The oven temperature can be set from 170° to 550° F.
• 350° will appear in the display when either ▲ or ▼ pad
is pressed once.
• Press and tap the ▲ or ▼ pad to change the oven temp-
erature by 5° increments or press and hold the ▲ or ▼
pad to change the oven temperature by 10° increments.
• 100° or the actual oven temperature, whichever is higher,
will appear in the display when the oven turns on.
• The temperature in the display will increase in 5°
increments until preset temperature is reached. A single
beep will sound when the oven is preheated.
• Allow 10 to 15 minutes for the oven to preheat.
• To recall preset temperature during preheat, press the
BAKE pad. The temperature will be displayed for three
seconds.
• To change oven temperature during cooking, press
the Bake pad, then press the ▲ or ▼ pad until the
desired temperature is displayed.
• To change oven temperature during preheat, press
the Bake pad twice, then press the ▲ or ▼ pad until
the desired temperature is displayed.
3. Place food in the oven. Check food for doneness at the
minimum cooking time.
13