Auto Answer; Do Not Disturb - Mitel Superset 430 User Manual

AUTO ANSWER

When this feature is activated, all incoming calls
to your telephone will be answered automatically.
On an incoming call, you will hear one short ring
and will then be automatically connected to the
call. Only your prime line can be programmed for
automatic answer.
Set Automatic Answer
You will need a Personal Key programmed as an
Auto Answer feature key in order to access the
Auto Answer feature.
Press the Auto Answer feature key.
The Line Status indicator for that key turns on and
Automatic Answer is activated.
Cancel Automatic Answer
Press the Auto Answer feature key.
The Line Status indicator for that key turns off and
Automatic Answer is disabled.
CALCULATOR
Use Built-In Calculator
Press SUPERKEY.
Press Calculator.
Perform calculations
using the dialpad to enter numbers, and softkeys to
perform functions as marked.
"*"
Press the button for decimal point.
Press SUPERKEY to exit.

DO NOT DISTURB

Do Not Disturb allows you to program your
telephone not to ring when someone calls. The
caller will hear reorder tone.
Set Do Not Disturb
Press SPEAKER.
Enter the Do Not Disturb feature
access code.
Press SPEAKER again.
Do Not Disturb is set for your telephone.
OR
Press the Do Not Disturb feature key.
The Line Status indicator for that key turns on.
Cancel Do Not Disturb
Press SPEAKER.
Enter the Cancel Do Not Disturb
feature access code.
Press SPEAKER again.
Do Not Disturb is set for your telephone.
OR
Press the Do Not Disturb feature key.
The Line Status indicator for that key turns off.