ZyXEL Communications P-2302HWUDL-P1 Support Notes page 58

Key Settings:
If the ZyXEL Device's DHCP server is enabled, the IP pool for the clients can be any of
DHCP Setup
the three networks.
Enter the first LAN IP address for the ZyXEL Device. This will create the first route in
TCP/IP Setup
the enif0 interface.
Edit IP Alias Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.
2. Edit the second and third networks in menu 3.2.1 by configuring the ZyXEL Device's second and third LAN
IP addresses.
IP Alias 1=
IP Alias 2=
Key Settings:
Toggle to 'Yes' and enter the second LAN IP address for the ZyXEL Device. This will
IP Alias 1
create the second route in the enif0:0 interface.
Toggle to 'Yes' and enter the third LAN IP address for the ZyXEL Device. This will
IP Alias 2
create the third route in the enif0:1 interface.
Menu 3.2.1 - IP Alias Setup
Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Yes
IP Address= 192.168.3.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302HWUDL-P1 Support Notes
58