ZyXEL Communications P-2302HWUDL-P1 Support Notes page 124

P2302HWUDL-P1 Support Notes
STEP 2: Press the DECT base station registration button on the top of the ZyXEL Device for 6 to 11
seconds. The DECT base station will change into registration mode. The ZyXEL Device starts to scan any
DECT phone in surrounding area which is currently in registration mode. When a ZyXEL Device
discovers a DECT phone in register mode, it sends a request for a PIN Code. The DECT phone receives
the request and prompts the user to enter the Pin Code.
Note: Please do not press the DECT registration button for 12 seconds or more, the DECT base station
will reset the entire previously registered DECT phone(s).
124
All contents Copyright  2007 ZyXEL Communications Corporation.