ZyXEL Communications P-2302HWUDL-P1 Support Notes page 80

MWI (Message
Waiting
Indication)
Enable
Expiration Time
Call Forward
Call Forward
Table
Caller Ringing
Enable
Caller Ringing
Tone
On Hold
Enable
On Hold Tone
<Back
Apply
Cancel
Select this if you want to hear a waiting (beeping) dial tone on your phone
when you have at least one voice message. Your VoIP service provider
must support this feature.
Keep the default value, unless your VoIP service provider tells you to
change it.Enter the number of seconds the SIP server should provide the
message waiting service each time the ZyXEL Device subscribes to the
service. Before this time passes, the ZyXEL Device automatically
subscribes again.
Select which call forwarding table you want the ZyXEL Device to use for
incoming calls. You set up these tables in VoIP > Phone Book > Incoming
Call Policy.
Select the check box if you want to specify what tone people hear when
they call you. The ZyXEL Device provides a default tone, but you can add
additional tones using IVR.
Select the tone you want people to hear when they call you. You should
setup these tones using IVR first.
Select the check box if you want to specify what tone people hear when you
put them on hold. The ZyXEL Device provides a default tone, but you can
add additional tones using IVR.
Select the tone you want people to hear when you put them on hold. You
should setup these tones using IVR first.
Click this to return to the SIP Settings screen without saving your changes.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302HWUDL-P1 Support Notes
80