System Board - HP EliteOne 800 G1 Maintenance & Service Manual

System board

Description
System board for use in models without Windows 8
System board for use in models with Windows 8 Standard
System board for use in models with Windows 8 Professional
The system board is located on the right side of the computer (viewed from the rear). It is secured with
eight Torx screws.
To remove the system board:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the stand (see
4.
Remove the lower panel (see
5.
Remove the memory modules (see
6.
Remove the heat sink (see
7.
Remove the processor (see
8.
Remove the WLAN module (see
9.
Disconnect all cables from the system board, noting their location for reinstallation.
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
Memory on page
Heat sink on page 70).
Processor on page
WLAN module on page
39).
44).
59).
72).
77).
Spare part number
758190-001
758190-501
758190-601
35).
System board
87