13.
Note the routing path for each antenna for replacement.
To install the antenna, reverse the removal procedures.
Display panel
Description
Display panel
Display panels require a backlight cable specific to the manufacturer. Make sure you use the backlight
cable packaged with the display panel.
The display panel is secured to the base pan with four Torx screws.
To remove the display panel:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the optical drive (see
4.
Remove the stand (see
5.
Remove the lower panel (see
Preparing to disassemble the computer on page
Access panel on page
Replacing the optical disc drive on page
Stand on page
41).
Lower panel on page
39).
56).
44).
Spare part number
732495-001
35).
Display panel
105