Front Bezel - HP EliteOne 800 G1 Maintenance & Service Manual

Front bezel

Description
Front bezel
The front bezel is located on the front of the computer and is secured to the main system bracket with
eight Torx screws.
Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not
include a webcam, you must remove the shutter and install the webcam insert (Webcam assembly kit)
into the slot in which the webcam would otherwise be installed.
To remove the front bezel:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the stand (see
4.
Remove the lower panel (see
5.
Remove the optical drive (see
6.
Remove the VESA mounting adapter (see
7.
Remove the power supply (see
8. Remove the side panels (see
9. Remove the speakers (see
10. Remove the power button board (see
100 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
Replacing the optical disc drive on page
VESA mounting adapter on page
Power supply on page
Side panels on page
Speakers on page 79).
Power button board on page
39).
44).
56).
84).
82).
98).
Spare part number
762610-001
35).
45).