Speakers - HP EliteOne 800 G1 Maintenance & Service Manual

Speakers

Description
Speakers
On products that ship with speakers, the speakers are located at the bottom of the computer. Two
separate speakers are each secured by two Torx screws. To remove the right speaker you have to
remove the power supply plug.
Speakers are optional.
To remove the speakers:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the stand (see
4.
Remove the lower panel (see
5. Remove Torx screw that secures the power connector to the computer, and lift the connector from
its position on top of the left speaker (1).
6. Remove two Torx screws (2) that secure each speaker to the computer.
7. Disconnect the speaker cables from the system board connector labeled SPKR (3).
8.
Remove the speakers from the computer.
To install the speakers, reverse the removal procedures.
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
39).
44).
Spare part number
698197-001
35).
Speakers
79