Serial Port - HP EliteOne 800 G1 Maintenance & Service Manual

Serial port

Description
Serial port
The serial port is located near the bottom of the computer below the hard drive. It is secured with one
Phillips screw.
To remove the serial port:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the lower panel (see
4. Remove the Phillips screw (1) that secures the port to the computer.
5. Slide the bottom of the port assembly to remove it from the tab in the computer (2).
64 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Access panel on page
Lower panel on page 44).
39).
Spare part number
698212-001
35).