Hard Drive And Optical Drive Cables And Connectors - HP EliteOne 800 G1 Maintenance & Service Manual

Hard drive and optical drive cables and connectors

Description
Optical drive cable (data and power assembly)
Hard drive cable (data and power assembly)
The hard drive and optical drive connectors are located near the middle of the computer, partially
under the main display bracket. Each connector is secured with two Torx screws and has two cables
that connect to the system board.
The optical drive connector cables are longer than the hard drive connector cables.
To remove the hard drive or optical drive connector:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the stand (see
4. Remove the lower panel (see
5. Remove the side panels (see
6. Remove the VESA mounting adapter (see
7. Remove the power supply (see
8. Remove the system board (see
9. Remove the front bezel (see
10. Remove the display panel (see
108 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
Side panels on page
VESA mounting adapter on page
Power supply on page
System board on page
Front bezel on page
Display panel on page
39).
44).
82).
84).
87).
100).
105).
Spare part number
698221-001
698215-001
35).
45).