Table of Contents
Advertisement
Making Embroidery Adjustments
Using the automatic thread cutting function
(END COLOR TRIM)
The automatic thread cutting function will cut the thread at
the end of sewing each color. This function is initially turned
on. To turn this function off, press
function can be turned on or off during embroidering.
a
Press
.
b
Press
to turn off the automatic thread cutting
function.
→ The key will display as
• When one color thread is sewn, the machine will
stop without cutting the thread.
c
Press
to return to the original screen.
Adjusting the embroidery speed
a
Press
to display the following screen.
b
Change the "Max Embroidery Speed" by pressing
/
.
c
Press
to return to the original screen.
E-28
key and then
. This
a
b
Memo
• "spm" is the number of stitches sewn in one
minute.
• Decrease the embroidery speed when
embroidering on thin, thick, or heavy fabrics.
• The sewing speed can be changed after an
embroidery pattern has been started.
• The maximum embroidery speed setting does not
change until a new setting is selected. The setting
specified before the main power is set to OFF
remains selected the next time that the machine is
turned on.
• Decrease to a slower spm when using a special
thread like a metallic thread.
Changing the "Embroidery Frame Display"
Press
to display the following screen.
In the "Embroidery Frame Display", use
change the embroidery frame display mode.
/
to
Advertisement
Table of Contents
Troubleshooting
