Baby Lock Aventura BLMAV Instruction And Reference Manual page 69

b Lay the fabric right side up on top of the outer frame.
Re-insert the inner frame making sure to align the inner
frame's with the outer frame's
1 Inner frame's
2 Outer frame's
3 Frame adjustment screw
c Slightly tighten the frame adjustment screw, and then
remove the slack in the fabric by gently pulling on the
edges and corners. Do not loosen the screw.
d Gently stretch the fabric taut, and tighten the frame
adjustment screw to keep the fabric from loosening
after stretching.
• After stretching the fabric, make sure the fabric is
taut.
• Make sure the inside and outside frames are even
before you start embroidering.
1 Outer frame
2 Inner frame
3 Fabric
.
e Return the frame adjustment screw to its initial
position.
■ Using the embroidery sheet
When you want to embroider the pattern in a particular
place, use the embroidery sheet with the frame.
a With a chalk pencil, mark the area of the fabric you
want to embroider.
1 Embroidery pattern
2 Mark
Memo
• After stretching the fabric, lightly tapping it should
produce a drum-like sound.
• Stretch the fabric from all four corners and all four
edges. While stretching the fabric, tighten the
frame adjustment screw.
Memo
• You can use the included screwdriver when you
loosen or tighten the frame adjustment screw.
Basic operations B-59
Preparing the Fabric
B